Step 1: Locate
Your processor should be located near your bed, plugged into a USB power adapter. The processor is a small, curved black device with circular vents, roughly the size of a deck of cards.
Step 2: Unplug
Unplug the processor's USB cable from the USB power adapter, and unplug the sensor plug(s). Set this processor aside.
Step 3: Install
If the bed has one sensor:
- Plug the processor's USB cable into the USB power adapter. Insert the sensor plug into the black sensor port in the processor.
If the bed has two sensors:
- Plug the processor's USB cable into the USB power adapter. Insert the sensor plug with the black cable (the sensor on the left side of the bed) into the black sensor port, and insert the sensor plug with the blue cable (the sensor on the right side of the bed) into the blue sensor port on the processor. Left and right is based on your viewpoint when you're standing at the foot of the bed and facing the head of the bed.
Wait for a blinking green status light on your new processor before continuing.
Step 4: App Setup
Pair the Smart Bed to your account in the Fullpower Sleep app. To do so, select Menu > Pair Smart Bed > Setup new Fullpower® Smart Bed, and then follow the instructions in the app. When the app prompts you to scan the QR code, be sure to scan the QR code that is located on your new processor.